Decorative
Seamless Flooring
Clear
Protective Coatings
|
|
|
POLYBAC #1319
Clear Epoxy Floor Coating
|
|
1. PRODUCT NAME
POLYBAC #1319 |
2. MANUFACTURER
Polygem, Inc.
1105 Carolina Drive
West Chicago, IL 60185
Telephone: (630) 231-5600
FAX: (630) 231-5604
Internet: www.polygem.com
|
3. PRODUCT DESCRIPTION
POLYBAC #1319 is a high performance, self-leveling, clear epoxy floor coating.
POLYBAC #1319 is formulated to be applied over a wide variety of surfaces including: exposed aggregate, concrete floors, epoxy and urethane coated floors, wood and most porous substrates. POLYBAC #1319 cures to a high gloss and is easily applied by roller, brush, squeegee or airless sprayer. POLYBAC #1319 is ideal for schools, shopping centers, auto showrooms, industrial floors, walls and ceilings.
Advantages / Features
- SELF-LEVELING
- 100% SOLIDS-NO SOLVENTS
- MOISTURE INSENSITIVE
- V.O.C. COMPLIANT
- EASY TO CLEAN
- TOUGH, DURABLE, CLEAR
Uses
| Thickness of Coating Applied (100 mils = 1 in.) |
Coverage per U.S. Gallon 100% Solids System |
| 1/4 in. = 250 mils | 6.4 sq. ft. |
| 3/16 in. = 187.5 mils | 8.5 sq. ft. |
| 1/8 in. = 100 mils | 16.0 sq. ft. |
| 1/16 in. = 50 mils | 32.0 sq. ft. |
| 1/32 in. = 20 mils | 80.0 sq. ft. |
1/64 in. = 10 mils
5 mils | 160 sq. ft.
320 sq. ft. |
|
|
4. APPLICATION INSTRUCTIONS
- Surface should be prepared by using conventional cleaning methods such as shot blasting, acid etching, disc grinding, sandbtasting or power washing. The surface to be covered should be free of loose materials, paints, sealants or oils. Use #20 solvent to remove oils and dirt.
- Blend 2 parts A (Resin) to 1 part B (Hardener) by volume. Mix with low speed drill until uniform color appears. DO NOT ADD SOLVENTS!
- Apply to prepared surf ace with brush, short nap rollr, squeegee or airless sprayer. Maintain temperature of material above 50° F. Do not apply to wet/damp floors. Do not apply in humid conditions.
- Allow 24 hours @ 75° F for light foot traffic. Allow 48 hours for machine traffic.
Consult Polygem for additional technical instructions
Packaging
3,15, 150 gallon kits
|
| 5.TECHNICAL DATA
Performance Properties
| Test |
Test Method Results |
|
|
| Viscosity (mixed) | 1,500 cps
|
| Pot Life @ 75°F(l quart) | 45 minutes
|
| Cure Time @ 75°F | 24 hours
|
| Color | Part A: Clear
Part B: Very Light Amber
|
| Ratio | 2:1 by volume
|
|
|
|
| Polygem, Inc. warrants its products to be free of manufacturing defects and that, at the time and place of shipment, our material will meet current physical properties when applied within Polygem’s directions and tested in accordance with ASTM and Polygem standards. Polygem, Inc’s liability is limited to replacement of material found defective. As Polygem, Inc. has no control over the use to which others may put its products, it is recommended that the product be tested to determine if suitable for a specific application and/or our information is valid in a particular circumstance. Responsibility remains with the architect or engineer, contractor and owner for the design, application and proper installation of each product. Nothing contained herein shall be construed to be a recommendation to use or as a license to operate under or to infringe any existing patents.
Data sheets are subject to change without notice, for latest revision check our website at www.polygem.com
|
|
