Do It Yourself with LCR - POLYGEM, Inc.

Mining & Industrial

LCR &
Water Proofing

Zoopoxy & Sculpting

Waterproofing and Foundation Repair

LCR - Liquid Concrete Repair

How To

LCR How-To

Crack Injection Techniques

Recommended Applications

To Purchase Product, call 888-446-3987

Do It Yourself with LCR

Fix Cracks in Poured Concrete the Easy Way

	Step 1 Clean the crack and wall with a wire brush. Angle the brush into the crack to remove dirt or loose concrete.
	Step 2 Dry damp spots on the wall with a heat gun or hair dryer. It must remain dry for at least 15 minutes.
	Step 3 Using a small amount of sealer paste, secure ports over the crack at 12-in. intervals
	Step 4 After the ports set, spread sealer paste 1/8 in. thick over the crack. Around ports, apply the paste slightly thicker.
	Step 5 Remove the shipping tape. Then jerk the plunger up in quick motion to separate the mixing wheel from the foil barrier.
	Step 6 Inject the liquid epoxy until it runs out of the port above. Then cap off the port you are injecting and move up the wall.