307-FR LITE-FLEX can be used as a sculpturing or texturing veneer over metal pole surfaces and is thick enough for immediate embossing upon placement. 307- FR LITE-FLEX is ideal for indoor or outdoor exhibit projects where durability and flexibility is desired. 307-FR LITE-FLEX can also be used as seaming or repair putty.

Performance Properties Test Test Method Results Tensilee Strength ASTM D-638 2,100 psi (min) Shore A Hardness 70 Viscosity Thick Gel Mix Ratio 1:1 Pot Life 50 minutes @77°F Cure Time 8-10 hours Packaging 2, 10, and 100 Gallon Kits

MIXING INSTRUCTIONS Thoroughly mix equal amounts of Part A and Part B by volume until streak free. Wearing protective gloves, trowel or spread the 307-FR LITE-FLEX and immediately texture, emboss or finish as desired. Small amounts of water may be used to help prevent the 307-FR LITE-FLEX from sticking to the gloves.