E-Z FLEX is available in an untinted liquid or gel formulas and can be pigmented or painted. E-Z FLEX is ideal for vines, trees, and leaves or other projects that require a more "lifelike" texture or feel. E-Z FLEX is furnished in convenient pre-measured kits for easy and accurate mixing of the product.

Performance Properties Test Test Method Results Compressive / Elongation 50+% Tensile Strength ASTM D-638 600 p.s.i. Viscosity Pourable or Gel Mix Ratio 4:1 by Volume Pot Life 30 minutes @70°F Cure Time 8 hours initial cure Packaging Pint, Quart and Gallon Kits

MIXING INSTRUCTIONS Add entire contents of the Part B container into the Part A container. Using a mixing stick or slow speed drill, thoroughly mix until streak free while being careful to avoid whipping air into the mixture. Apply the E-Z FLEX by hand, brush or trowel to surface in thin layers up to 1/4” thick. Allow a 3 hour initial cure before applying additional layers of E-Z Flex and allow 24 hour cure before coating or painting the E-Z FLEX.