POLYBACŪ #500 can be applied overhead without sagging. Adheres to clean substrates such as: metal, glass, most woods, ceramics, painted surfaces and many other substrates.

POLYBACŪ #500 was formulated to perform at temperatures ranging from -86°F to 400°F continuously and at 425°F intermittently.

Performance Properties Test Test Method Results Colors aluminum, black, clear, white Specific Gravity @ 77° F (25° C) 1.04 Extrusion Rate (1/8” orifice, 90 psi air pressure) 350 gms/min Flow Rate (sag or slump on 1/8 x 4” bead), in nil Tack-tree Time @ 77° F (25° C) and 50% RH 10-20 minutes Cure Time @ 77° F (25° C) and 50% RH (1/8” thickness) 24 hours

MIXING INSTRUCTIONS Surface must be clean, dry and free of dirt and oil. Do not apply if frost is present. Cut tip to desired bead size. Dispense with caulking gun. Apply sealant at 45° angle by pushing sealant ahead of nozzle. Work material with putty knife or similar tool. Allow 30 minutes to touch; 24 hours for full cure and strength.