POLYFLEX 2000 is available in an liquid or gel formulas and can be pigmented or painted. POLYFLEX 2000 is ideal for vines, trees, leaves or other projects that require a more realistic texture or feel. POLYFLEX 2000 is furnished in convenient pre-measured kits for easy and accurate mixing of the product.

Performance Properties Test Test Method Results Compressive / Elongation 40+% Tensile Strength ASTM D-638 350 p.s.i. Viscosity Pourable or Gel Mix Ratio 1:1 by Volume Pot Life 60 minutes @ 70°F Cure Time 12 hours initial cure Packaging Pint, Quart and Gallon Kits

MIXING INSTRUCTIONS Using a mixing stick or slow speed drill, thoroughly mix equal amounts of Part A and Part B until streak free. Apply the POLYFLEX 2000 by hand, brush or trowel to surface in thin layers up to 1/4” thick, Allow an initial cure before applying additional layers of POLYFLEX 2000 and allow a minimum 24 hour cure before coating or painting the POLYFLEX 2000. POLYFLEX 2000 can be additionally thickened with POLYGEM Thickening Agent.