1618 Epoxy Floor Coating

High Gloss Epoxy Floor Coating
$27.49
SKU: 1618
Weight: 5 lb
Dimensions: 14 in × 7 in × 8.5 in
Product Description: 

#1618 is a ultra-clear epoxy coating formulated to provide a durable high-gloss protective surface. #1618 is ideal for concrete and wood floor surfaces and is ideal for a clear-coat over flake and quartz floors.

#1618 is also excellent as a sealer coat over artificial rock and coral structure used in underwater exhibits and aquariums.

  • Self-leveling
  • 100% Solids
  • No Solvents
  • Miosture Insensitive
  • V.O.C. Compliant
  • Easy to clean
  • Tough, durable, clear
Application Instructions: 
  1. Surface should be prepared by using conventional cleaning methods such as shot blasting, acid etching, disc grinding, sandbtasting or power washing. The surface to be covered should be free of loose materials, paints, sealants or oils. Use #20 solvent to remove oils and dirt.
  2. Blend 2 parts A (Resin) to 1 part B (Hardener) by volume. Mix with low speed drill until uniform color appears. DO NOT ADD SOLVENTS!
  3. Apply to prepared surf ace with brush, short nap rollr, squeegee or airless sprayer. Maintain temperature of material above 50° F. Do not apply to wet/damp floors. Do not apply in humid conditions.
  4. Allow 24 hours @ 75° F for light foot traffic. Allow 48 hours for machine traffic.
Packaging: 

1.5 Gallon Kits.  Also available in 1.5 Quart kits, 3 gallon Kits, 15 Gallon Kits and 150 Gallon Drum Kits.

Technical Data: 

See attached Data Sheet for Technical

Product Category: 


Polygem, Inc. warrants its products to be free of manufacturing defects and that, at the time and place of shipment, our material will meet current physical properties when applied within Polygem’s directions and tested in accordance with ASTM and Polygem standards. Polygem, Inc’s liability is limited to replacement of material found defective. As Polygem, Inc. has no control over the use to which others may put its products, it is recommended that the product be tested to determine if suitable for a specific application and/or our information is valid in a particular circumstance. Responsibility remains with the architect or engineer, contractor and owner for the design, application and proper installation of each product. Nothing contained herein shall be construed to be a recommendation to use or as a license to operate under or to infringe any existing patents.

Data sheets are subject to change without notice.