307 Lite Sculpting Epoxy Putty

Sculpting Epoxy Putty
SKU: 307lite
Weight: 7 lb
Dimensions: 9 in × 5 in × 5 in
Product Description: 

307 Lite is a 100% solids light-weight epoxy system specially formulated to a trowelable paste consistency for sculpturing and fabricating projects.  307 Lite will cure into an extremely strong and light-weight plastic that is easily sanded or shaped. 307 Lite can be tinted or painted and will even accept stains.  It  bonds well to most surfaces including fiberglass, foams, metal, wood and concrete.  Plus, it is solvent free so it won’t melt or dissolve foam surfaces.


307 Lite can be used as a sculpturing or texturing veneer over other surfaces and is thick enough for immediate embossing upon placement.  307 Lite is ideal for indoor or outdoor exhibit projects where strength and durability are desired.  307 Lite can also be used as a patching compound to repair broken or damaged exhibits.  307 Lite can be additionally thickened using our Thickening Agent.

  • 25% Lighter formula
  • NO Solvents
  • Non-toxic
  • Sandable
  • Paintable
  • Pigmentable
  • Environmentally Safe
  • Cleans with Water
  • Idea for Underwater Applications




Application Instructions: 

Thoroughly mix equal amounts of Part A and Part B by volume until streak free.  Wearing protective gloves, trowel or spread the 307 Lite and immediately texture, emboss or finish as desired.  Small amounts of water may be used to help prevent the 307 LITE from sticking to the gloves.  The optional Thickening Agent can be used to thicken the mixture to desired consistency for sculpting, stamping and texturing.  Do not apply 307  Lite when ambient temperatures or surface temperatures are below 50 F.


2 Quart, 2 Gallon, 10 Gallon and Drum Kits.

Technical Data: 
Product Category: 
Product Tags: 

Polygem, Inc. warrants its products to be free of manufacturing defects and that, at the time and place of shipment, our material will meet current physical properties when applied within Polygem’s directions and tested in accordance with ASTM and Polygem standards. Polygem, Inc’s liability is limited to replacement of material found defective. As Polygem, Inc. has no control over the use to which others may put its products, it is recommended that the product be tested to determine if suitable for a specific application and/or our information is valid in a particular circumstance. Responsibility remains with the architect or engineer, contractor and owner for the design, application and proper installation of each product. Nothing contained herein shall be construed to be a recommendation to use or as a license to operate under or to infringe any existing patents.

Data sheets are subject to change without notice.