307 Sculpting

Original Zoopozy Sculpting Hard Coat
Weight: 7 lb
Product Description: 

307 Sculpting is a general purpose sculpturing putty formulated specifically for exhibit construction. The sculpturing putty exhibits excellent adhesion to any two porous surfaces. It is  a 100% solids, two component epoxy capable of being applied horizontally or vertically without sagging.

Typical applications include bonding various clean metals to wood, fiberglass, concrete, gunite and each other. 307 Sculpting is aflexibilized system, therefore exhibiting excellent shock and impact resistance.

  •  used to fabricate artificial trees, roots and rocks in natural habitats.
  •  can be used indoors or outdoors and has excellent resistance to animal urine.
  • 307 -M has been specially formulated for overhead applications. It is a thicker version of #307 and retains similar properties.  #07 and 307-M can be pigmented using epoxy pigments or dry pigments. The cured products may also be coated with epoxy or latex paints.
Application Instructions: 

Mix equal Parts A and Part B by specified volume in a clean mixing pail. Mix the resins with a mixing trowel or paddle of slow-speed drill mixer. Mix the resin for 3 minutes and repeatedly scrape the sides and bottom of pail to ensure a thorough mix. Wear protective gloves, NIOSH approved respirator and splash-proof chemical goggles when mixing and applying all epoxy resins.


2 Quart Kits.  307 is also available in 2 Gallon Kits, 10 Gallon Kits and 100 Gallon Drum Sets

Product Category: 
Product Tags: 

Polygem, Inc. warrants its products to be free of manufacturing defects and that, at the time and place of shipment, our material will meet current physical properties when applied within Polygem’s directions and tested in accordance with ASTM and Polygem standards. Polygem, Inc’s liability is limited to replacement of material found defective. As Polygem, Inc. has no control over the use to which others may put its products, it is recommended that the product be tested to determine if suitable for a specific application and/or our information is valid in a particular circumstance. Responsibility remains with the architect or engineer, contractor and owner for the design, application and proper installation of each product. Nothing contained herein shall be construed to be a recommendation to use or as a license to operate under or to infringe any existing patents.

Data sheets are subject to change without notice.