E-Z Cast - Pourable Casting Epoxy

Pourable 100% Solids Casting Epoxy
Weight: 6 lb
Dimensions: 9 in × 5 in × 5 in
Product Description: 

E-Z Cast is a 100% solids casting epoxy specially to provide intricate detail and superior finish qualities for most casting projects. E-Z Cast will cure into an extremely strong and durable plastic that is easily sanded or polished. E-Z Cast can be tinted or painted and will even accept stains and washes. E-Z Cast is solvent free and won’t dissolve foam surfaces or shrink during its cure. E-Z Cast is a low viscosity liquid and has excellent air release properties for bubble free castings.

E-Z Cast is ideal for small or large castings where strength and durability are desired. E-Z Cast is available in a special Bone White color to provide for a realistic fossilized finish for bone castings. Consult with Polygem’s technical department for assistance with large volume castings.

  • NO Solvents
  • Non-toxic
  • Sandable
  • Paintable
  • Pigmentable
  • Enviornmentally Safe
Application Instructions: 

Pour the entire contents of Part B into the Part A container and slowly mix the contents for 3 minutes with a slow speed drill mixer. Avoid whipping air into the mixture and slowly pour the mixture into the mold.


Quart Kits, 1 Gallon Kits and 2 Gallon Kits. 

Product Category: 

Polygem, Inc. warrants its products to be free of manufacturing defects and that, at the time and place of shipment, our material will meet current physical properties when applied within Polygem’s directions and tested in accordance with ASTM and Polygem standards. Polygem, Inc’s liability is limited to replacement of material found defective. As Polygem, Inc. has no control over the use to which others may put its products, it is recommended that the product be tested to determine if suitable for a specific application and/or our information is valid in a particular circumstance. Responsibility remains with the architect or engineer, contractor and owner for the design, application and proper installation of each product. Nothing contained herein shall be construed to be a recommendation to use or as a license to operate under or to infringe any existing patents.

Data sheets are subject to change without notice.