GEMLOCK FLEX 22 oz. Dual Cartridge Pick-Proof Epoxy

Pick Proof Epoxy Gel
$23.35
SKU: GMLKFLEX-22 oz
Weight: 28 oz
Dimensions: 9 in × 5 in × 5 in
Product Description: 

Gemlock FLEX  is extremely strong and durable epoxy sealant specially formulated to resist tampering or removal.  Gemlock FLEX exhibits superior adhesion to most surfaces such as concrete, metal, wood and fiberglass. Gemlock FLEX is a hard yet resilient sealant offering excellent thermal shock and impact resistant. 

 

Advantages                             

  •  Excellent Adhesion to most Surfaces        
  •  No VOC’s or Solvents
  •  Tough and Durable Surface
  •  Chemical and Solvent Resistant
  •  Water Clean-up Formulation
  •  Resists tampering or removal

Uses:

  • Window & Door Frames
  • Lock Ups
  • Wall, Ceiling and Floor Joints
  • Sinks and Toilets
  • Chemical Anchoring

 

 

Application Instructions: 

Application Instructions:

 Gemlock FLEX is easily mixed and applied by trowel or bulk loading caulk dispensers.

  • Surfaces to be sealed should be clean of dirt, oils, surface water and loose paint or coatings.
  • Clean surface by shot blasting or sanding to provide clean and open surface.
  • Scrape side and bottom of pail frequently during mixing to insure a good mix.  
  • Mix only enough that can be applied in 45 minutes
  1. Thoroughly mix measured amounts of 1 part of Part-A (Resin) with 1 part of Part-B (Hardener) by volume until streak free.      
  2. Spread mixed epoxy with trowel or dispense with a bulk loading type caulking dispenser.
  3. Use a cloth or sponge dampened with water to smooth epoxy surface.
  4. Clean up any un-cured epoxy with warm soapy water.
Packaging: 

22 oz cartridge that comes with a static mixer and nut

Product Category: 


Polygem, Inc. warrants its products to be free of manufacturing defects and that, at the time and place of shipment, our material will meet current physical properties when applied within Polygem’s directions and tested in accordance with ASTM and Polygem standards. Polygem, Inc’s liability is limited to replacement of material found defective. As Polygem, Inc. has no control over the use to which others may put its products, it is recommended that the product be tested to determine if suitable for a specific application and/or our information is valid in a particular circumstance. Responsibility remains with the architect or engineer, contractor and owner for the design, application and proper installation of each product. Nothing contained herein shall be construed to be a recommendation to use or as a license to operate under or to infringe any existing patents.

Data sheets are subject to change without notice.