Static Mixer

Static Mixer for Epoxy and Polyurethane Injection Resins
$2.00
SKU: Mixer
Weight: 2 oz
Dimensions: 8 in × 5 in × 5 in
Product Description: 
1/4" by 32 element static mixer which is ideal for low to high viscosity epoxy and polyurethane injection resins. It has a smooth tip which will fit most small necked injection ports. Requires the 1/2" locking retaining nut.
Technical Data: 
1/4" Interior Diameter, 9.5" in length, 32 helical elements.
Product Category: 


Polygem, Inc. warrants its products to be free of manufacturing defects and that, at the time and place of shipment, our material will meet current physical properties when applied within Polygem’s directions and tested in accordance with ASTM and Polygem standards. Polygem, Inc’s liability is limited to replacement of material found defective. As Polygem, Inc. has no control over the use to which others may put its products, it is recommended that the product be tested to determine if suitable for a specific application and/or our information is valid in a particular circumstance. Responsibility remains with the architect or engineer, contractor and owner for the design, application and proper installation of each product. Nothing contained herein shall be construed to be a recommendation to use or as a license to operate under or to infringe any existing patents.

Data sheets are subject to change without notice.