307 Fr Lite Flex- Fire Retardant Flexible Sculpting Epoxy Putty

Class 1 Fire Retardant Flexible Sculpting Epoxy Putty
Weight: 7 lb
Dimensions: 14 in × 8.5 in × 7 in
Product Description: 

307 Fr-Lite-Flex is a 100% solids flexibilized sculpturing zoo mix epoxy system specially formulated to provide a durable surface that is thermal expansion or contraction resistant.  307 Fr-Lite-Flex will cure into an extremely strong and flexible plastic that is easily sanded or shaped. 307 Fr-Lite-Flex can be tinted or painted and will even accept stains. 307 Fr-Lite-Flex bonds well to most surfaces including fiberglass, foams, metal, wood and concrete.  307 Fr-Lite-Flex is solvent free so it won’t dissolve foam surfaces.

307 Fr-Lite-Flex can be used as a sculpturing or texturing veneer over metal pole surfaces and is thick enough immediate embossing upon placement.  307 Fr-Lite-Flex is ideal for indoor or outdoor exhibit projects where durability and flexibility is desired.  Our zoopoxy 307 Fr-Lite-Flex can also be used as seaming or repair  putty.

307 Fr-Lite-Flex can be additionally  thickened using our Thickening Agent.


  • Flexibalized Formula
  • Fire Retardant
  • NO Solvents
  • NO Isocyanites
  • Sandable
  • Paintable
  • Pigmentable
  • Environmentally Safe
  • Cleans with Water
Application Instructions: 

Thoroughly mix equal amounts of the Zoopoxy,  Part A and Part B by volume until streak free.  Wearing protective gloves, trowel or spread the 307 Fr-Lite-Flex and immediately texture, emboss or finish as desired.  Small amounts of water may be used to help prevent the 307 Fr-Lite-Flex  from sticking to the gloves.


2 Gallon, 10 Gallon and 100 Gallon Kits.

Technical Data: 
Product Category: 
Product Tags: 

Polygem, Inc. warrants its products to be free of manufacturing defects and that, at the time and place of shipment, our material will meet current physical properties when applied within Polygem’s directions and tested in accordance with ASTM and Polygem standards. Polygem, Inc’s liability is limited to replacement of material found defective. As Polygem, Inc. has no control over the use to which others may put its products, it is recommended that the product be tested to determine if suitable for a specific application and/or our information is valid in a particular circumstance. Responsibility remains with the architect or engineer, contractor and owner for the design, application and proper installation of each product. Nothing contained herein shall be construed to be a recommendation to use or as a license to operate under or to infringe any existing patents.

Data sheets are subject to change without notice.