Cammo-Flex - Liquid - Flexible Epoxy

Flexible Epoxy Gel Coating
$109.98
SKU: CammoFlexLQD
Weight: 15 lb
Dimensions: 14 in × 8.5 in × 7 in
Product Description: 

Cammo  Flex is a 100% solids epoxy system specially formulated to provide a flexible surface for sculpturing and modeling projects.  Cammo  Flex will cure into a durable rubber that will accommodate movement and even bend upon cure.  Cammo  Flexis available in an untinted liquid or gel formulas and can be pigmented or painted.  Cammo  Flex is ideal for vines, trees, and leaves or other projects that require a more “lifelike” texture or feel.  Cammo  Flex is furnished in convenient pre-measured kits for easy and accurate mixing of the product.

Application Instructions: 

Add entire contents of the Part B container into the Part A container.  Using a mixing stick or slow speed drill, thoroughly mix until streak free while being careful to avoid whipping air into the mixture.  Apply theCammo  Flex by hand, brush or trowel to surface in thin layers up to 1/4” thick.  Allow a 6 hour initial cure before applying additional layers of Cammo  Flex and allow 24 hour cure before coating or painting theCammo  Flex.

Packaging: 

1.5 Gallon Kits, 3 Gallon Kits and 15 Gallon Kits.

Product Category: 


Polygem, Inc. warrants its products to be free of manufacturing defects and that, at the time and place of shipment, our material will meet current physical properties when applied within Polygem’s directions and tested in accordance with ASTM and Polygem standards. Polygem, Inc’s liability is limited to replacement of material found defective. As Polygem, Inc. has no control over the use to which others may put its products, it is recommended that the product be tested to determine if suitable for a specific application and/or our information is valid in a particular circumstance. Responsibility remains with the architect or engineer, contractor and owner for the design, application and proper installation of each product. Nothing contained herein shall be construed to be a recommendation to use or as a license to operate under or to infringe any existing patents.

Data sheets are subject to change without notice.