Armorcoat- Brushable Epoxy Hard Coat

Brushable Epoxy Hard Coat for Hardcoating Foam and other Surfaces
Weight: 8 lb
Dimensions: 8 in × 5 in × 5 in
Product Description: 

Armorcoat  is a 100% solids epoxy that is formulated with reinforcing and impact resistant technologies to make is one of the strongest and most durable expoxy hard coats Polygem makes.  Armorcoat is ideal for the hard coating of most surfaces including EPS and other foams.  It  will cure into an extremely strong durable “hard-shell” plastic that can be sanded and painted. Armorcoat is solvent free so it won’t melt, distort or dissolve foam surfaces.

Armorcoat is specially formulated to a creamy smooth consistency that can be applied by brush, roller and even sprayed.  It may also be used as a high-strength bonding or laminating adhesive.

Add the thickener to this hardcoat! 

Application Instructions: 

Thoroughly blend equal amounts of the part A and Part B by volume until streak free and uniform in color.  One coat of Armorcoat applied at 1/16" thick (62.5 mils) will yield 25.5 square feet per gallon.

Product Category: 

Polygem, Inc. warrants its products to be free of manufacturing defects and that, at the time and place of shipment, our material will meet current physical properties when applied within Polygem’s directions and tested in accordance with ASTM and Polygem standards. Polygem, Inc’s liability is limited to replacement of material found defective. As Polygem, Inc. has no control over the use to which others may put its products, it is recommended that the product be tested to determine if suitable for a specific application and/or our information is valid in a particular circumstance. Responsibility remains with the architect or engineer, contractor and owner for the design, application and proper installation of each product. Nothing contained herein shall be construed to be a recommendation to use or as a license to operate under or to infringe any existing patents.

Data sheets are subject to change without notice.